TOP 5 Best Gas Weed Eater For The Money

Best Gas Weed Eater For The Money 2019

These products go by lots of names – weed eater, weed wacker, edge trimmer, string trimmer – but the job is the same. You need a weed eater to cut down weeds and tall grass at the edges of your yard and around landscaping. Chances are your lawnmower isn’t able to reach areas that end next to a driveway, sidewalk, or the home itself. Different lawns have different needs, but we can help you find the best gas weed eater for your green space.

Most weed eaters have the same basic construction, with a handle at the top end of a long shaft and the cutting mechanism at the bottom. The goal is to cut back those weeds without having to bend over. Many weed eaters use rapidly rotating plastic string to cut, but some have actual blades. Let’s take a look at some feature options and then we’ll show you the five most highly reviewed gas weed eaters on the market.

Types of Weed Eater


There are three main types of weed eaters: electric, battery, and gas. For the purposes of this article, we are talking about gas weed eaters. They tend to be more powerful. And assuming that you already have gas for your lawnmower, this type of weed eater can be very convenient. We will also describe the other types of weed eater for comparison’s sake.

Gas

Gas weed eaters are the most powerful you can buy, and that’s important when you have thick weeds or grass. It’s totally frustrating to invest in a tool that ends up not being able to do the job. On the other hand, gas weed eaters typically require a mixture of ethanol-free gas and oil, which is more labor intensive than simply plugging the unit into an outlet or recharging its battery.

Because gas powered weed eaters are not attached to a cord, they can be used anywhere, even into the deepest corners of your yard. They can also typically hold more cutting line than other models. However, the trade-off is that gas weed eaters tend to be heavier and noisier.

Electric

Electric weed eaters can be perfect for smaller yards. They are lighter and quieter than gas models, and all you need is an accessible electrical outlet. The challenge posed by an electric weed wacker is that you are restricted by the length of the cord and need to maneuver around it, which can be tricky.

Battery

A battery powered weed eater is light and makes virtually no noise during operation. Because they aren’t hampered by a cord, they can be used anywhere. However, you are limited by the battery life, and if you don’t have a spare, you could get stopped in the middle of a job. You will also notice diminishing power as the battery drains.

Features

In an ongoing effort to improve their products, weed eater manufacturers continually add new features to make the job easier and more efficient. Following are some features you might want to consider when shopping.

  • * Shoulder straps can help you bear the weight of your gas weed wacker, which is especially useful with these units as they tend to be heavier.
  • * Double blades or cutting lines make quick work of weeds.
  • Speed controls allow you to tailor the cutting action to the job.
  • * An anti-vibration handle greatly reduces hand fatigue during operation.
  • * Ergonomic handles also make operation easier by contouring to your grip.
  • These extras are very nice, but make certain first that the cutting width is sufficient for your needs and the weight isn’t too much to operate comfortably.

    TOP 5Best Gas Weed Eater

    -Product Comparison

    Brand

    ​Our Rating

    Cutting Width

    Engine

    Cycles

    Weight

    Warranty

    #1 Editor Choice

    17”

    28 cc

    2

    10.8 lbs.

    Two years

    #2

    16”

    21.2cc

    2

    10 lbs.

    Five years

    #3

    17”

    27.5cc

    2

    9.9 lbs.

    Two years

    #4

    17”

    28cc

    2

    14 lbs.

    Two years

    #5

    14”

    25cc

    2

    15.95 lbs.

    Two years

    Product Reviews

      1    Husqvarna 128LD, 28cc 2-cycle 17 in. Straight Shaft Gas String Trimmer

    Husqvarna 128LD
  • This Husqvarna weed eater is technically a commercial weed eater but is simple enough for anyone to use. It has Smart Start technology so that you will never struggle to get the thing going. It is also relatively lightweight for a gas powered weed eater at just over 10 pounds. For storage or travel, the handle is detachable.
  • It has a 28cc engine and two speed cycles, with a 17” cutting width. The cable drive is constructed with strong braided wire. This weed eater is built strong enough to tackle a variety of jobs, from edging grass to trimming branches. The basic configuration uses .095 diameter trimmer line, but one of the nice things about the Husqvarna is that it has a bunch of different attachments available that can be easily clicked into place. A few examples include a hedge trimmer, tiller, and sweeper. The included cutting guard is made to use with either the grass blade or trimmer head.
  • If you have multiple jobs to accomplish, the versatility of this weed eater may save you a ton of money on additional tools.
  • * Specs

    12.2 x 10.2 x 40 inches

    10.8 pounds

    Two year warranty

    PROS

     - Starts easily and runs almost vibration-free

     - Semi-auto spool feeding

     - Easy to install trimmer line that doesn’t degrade as fast as others

    CONS

     - Noisier than electric models

     - May need some adjustment out of the box

     - Shaft is slightly short for people over 6’ tall

      2    Echo GT-225 2 Cycle 21.2cc Curved Shaft Gas Trimmer

     Echo GT-225 2 Cycle 21.2cc Curved Shaft Gas Trimmer
    The Echo GT-225 is a lightweight weed eater designed with ergonomics in mind. The curved shaft makes guiding it easier, and users have said that it helps better reach areas under bushes. The ergonomic handle is adjustable so as to fit any hand like a glove. However, whether a curved or straight shaft works better is a matter of personal preference with strong opinions on both sides.

    What’s indisputable is the ease with which the Echo weed eater starts up. The starter is designed to require less pulling effort, so you don’t wrench your arm before you even start trimming. The trimmer line is also easy to install and replace as needed with a trademarked 2-line Rapid-Loader system.

    The engine is a moderately powerful 21.2cc professional-grade model with 2 cycles. It has a slightly smaller-than-average cutting width at 16”, but this is not bothersome to most people. Some users did feel that the debris guard was not sufficient to keep from having their legs hit with spraying grass.

    You can secure a long five year warranty on your Echo weed eater, but you must register your product online to receive it.

    * Specs

    15.1 x 12.4 x 56.9 inches

    10 pounds

    5 year warranty

    PROS

    - Starts easily

    - Lightweight and easily maneuverable

    - Ergonomic handle provides custom fit

    CONS

     - Some people dislike the curved shaft

     - Debris guard is too narrow to shield against all flying material

     - Line may get tangled in thick vegetation

     3    Jonsered GTS2228, 17 in. 27.5cc 2-Cycle Gas Straight Shaft String Trimmer

     Jonsered GTS2228, 17 in. 27.5cc 2-Cycle Gas Straight Shaft String Trimmer

    If energy efficiency is your main concern, look no further than this Jonsered weed eater. It has a Clean Power™ engine that is specially designed to reduce harmful exhaust emissions by up to 75%. It can also go longer between fill-ups, with a fuel efficiency up to 20% better than other models. Still, it delivers a solid 27.5 ccs of power and features 2 cycles to best tackle every job.

    Start her up easily with a spin start feature that reduces resistance on the starter cord. It also has a fuel pump that is designed with easy starting in mind, and the stop button automatically returns to the start position to minimize the number of pulls you need to restart. For smoother operation, there are intuitive controls for the choke and purge.

    This straight shaft model has a twin line cutting mechanism and the cutting equipment is situated parallel to the ground for reliable cutting performance. The Tap ‘n Go system allows for quick line feeding, but the process can be a bit tricky according to some users. Like most other models on our list, the Jonsered has a wide 17” cutting path. And at less than 10 pounds, it is a lightweight weed eater that you can use over the long haul.

    This product is made in the United States and offers a two year warranty.

    * Specs

    70 x 9 x 10 inches

    9.9 pounds

    2 year warranty

    PROS

    - Fuel efficient operation

    - Easy to start and restart

    - Lightweight yet powerful

    CONS

     - Can be difficult to restring

     - Smaller gas tank

     - Uses string quickly

     4    Poulan Pro PR28SD, 17 in. 28cc 2-Cycle Gas Straight Shaft String Trimmer

     Poulan Pro PR28SD, 17 in. 28cc 2-Cycle Gas Straight Shaft String Trimmer

    The Poulan Pro is a bit on the heavy side at 14 pounds, but makes up for that with its versatility. There are six optional attachments that allow for blowing, tilling, hedge trimming, edging, brush cutting, or even tree pruning in addition to standard edge trimming.

    It also advertises effortless starting with a SureFire Fuel Delivery System that’s as easy as 1-2-3, or Prime, Choke, and Pull. The starter string is spring assisted to pull easily, and as with other models on our list, the Poulan has an auto return stop switch that automatically resets to the on position. An air purge feature removes air from the carburetor and fuel system.

    This gas string trimmer has a dual line feed and 17” cutting width to make short work of your trimming jobs. You can trust that you’ll have enough power with a 28cc engine featuring 2 cycles. This weed eater has a straight shaft and easily reloadable Tap ‘n Go feed.

    * Specs

    39.8 x 10.2 x 10 inches

    14 pounds

    2 year warranty

    PROS

    - Starts easily and runs smoothly at either speed

    - Powerful performance

    - Long shaft allows comfortable use by tall people

    CONS

     - May be too heavy for some users

     - Some bend and shift where motor is connected to shaft upon starting

     - No auto-rewind for string

     5    Troy-Bilt TB25S EC 25cc 2-Cycle Straight Shaft Gas String Trimmer

     Troy-Bilt TB25S EC 25cc 2-Cycle Straight Shaft Gas String Trimmer

    This is a more petite weed eater with a 14” trimming width, yet it is still the heaviest model on our list at 15.95 pounds. For those reasons, it is not for everybody. However, you might appreciate the tight cutting width in smaller spaces and the heft speaks to its durable build quality.

    The Troy-Bilt has a straight shaft with a multi-position handle that reduces vibration and the potential for operator fatigue, but users report that it does vibrate quite a bit during operation. Moving the handle every so often shifts the impact of the vibrations so that one area doesn’t get overly fatigued.

    It is equipped with a 25cc gas engine that has a spring assisted starter and runs 2 cycles. The fixed line head must be manually threaded, but it is easily doable. This model can be converted via TrimmerPlus attachments so that it works as an edger, blower, hedge trimmer, and even a cultivator. You can also purchase a JumpStart attachment, if desired, that makes super short work of starting up the motor.

    * Specs

    38.2 x 11.2 x 12.4 inches

    15.95 pounds

    2 year warranty

    PROS

    - Built for durability

    - A range of attachments are available

    - Multi-position handle

    CONS

     - Vibrates quite a bit while in use

     - Heavy

     - Smaller cutting width and fixed head

    Tips and Tricks

    There can be a bit of a learning curve to operating a gas powered weed eater. Here are some tips and tricks to make it easier.

    Attire matters

    Always cover exposed skin when using the weed eater because debris tends to fly, and this can include small stones and sticks. A long sleeved shirt, long pants, and gloves are critical. Eye protection should be non-negotiable, and there are a couple of ways to achieve this. One is a simple pair of safety glasses. Another is a weed eater visor, which protects your whole face from injury due to flying debris.

    Buy extra accessories

    Most weed eaters use a plastic or nylon cord that spins very fast to cut through grass and weeds. Over time, the cord becomes degraded and frayed, and eventually it breaks. Invariably this happens in the middle of a job.

    If you always keep some spare cord on hand, you won’t need to run to the store in order to replace it and finish the work. It’s also good to make sure you have extra gas and oil available in case you run out mid-job.

    Protect your trees

    Close-up around trees is one of the places where we typically need to trim, but if that rotating string hits the trunk, it will damage and potentially kill your tree. One good option is to mulch around your trees so that you don’t need to get too close with the weed eater. Another is to mow as close as you can without hitting the trunk and then hand trim around the trunk.

    Pay attention to conditions

    If your grass is wet when you use your weed eater, it can pose a couple of problems. The first is simply that you might slip and fall. But in terms of results, wet grass and weeds tend to bog down your machine and will cause excess wear and tear.

    Move in the correct direction

    Most weed eaters that use cord for cutting have a head that spins in a counterclockwise direction. If this is the case with yours, it will cut much more effectively if you sweep the tool from right to left across the grass. Check the manual to be sure; if your head rotates clockwise, sweep from left to right while trimming.  

    Make multiple passes

    High grass or weeds must be cut in segments rather than all at once. First cut off the top part and then work closer to the ground. Not only will your trimmer work more effectively, you will avoid having huge long stems and blades get tangled up around your weed eater. For heavy duty jobs, it’s best to switch out the line for a metal blade.

    Take breaks

    When you’re using a gas powered weed eater, your hands and wrists are exposed to a lot of vibration. After awhile, this can cause tingling and numbness. The effects also seem to be worse in cold weather. If you begin to experience discomfort, turn off the weed eater and take a break until normal feeling returns. Pushing through can actually cause permanent nerve damage.

    Warm up the engine

    Gas powered weed eaters should be warmed up prior to use. Start the motor but make sure that the accelerator trigger is disengaged so that the line isn’t spinning while you wait. It only takes a few minutes, but you’ll find the operation is much smoother and less likely to sputter with a warm motor.

    Move in the correct direction

    Most weed eaters that use cord for cutting have a head that spins in a counterclockwise direction. If this is the case with yours, it will cut much more effectively if you sweep the tool from right to left across the grass. Check the manual to be sure; if your head rotates clockwise, sweep from left to right while trimming.  

    Make multiple passes

    High grass or weeds must be cut in segments rather than all at once. First cut off the top part and then work closer to the ground. Not only will your trimmer work more effectively, you will avoid having huge long stems and blades get tangled up around your weed eater. For heavy duty jobs, it’s best to switch out the line for a metal blade.

    Take breaks

    When you’re using a gas powered weed eater, your hands and wrists are exposed to a lot of vibration. After awhile, this can cause tingling and numbness. The effects also seem to be worse in cold weather. If you begin to experience discomfort, turn off the weed eater and take a break until normal feeling returns. Pushing through can actually cause permanent nerve damage.

    Warm up the engine

    Gas powered weed eaters should be warmed up prior to use. Start the motor but make sure that the accelerator trigger is disengaged so that the line isn’t spinning while you wait. It only takes a few minutes, but you’ll find the operation is much smoother and less likely to sputter with a warm motor.

    Weed Eater Maintenance

    Once you’ve invested money in your weed eater, you want to keep it in great working order for as long as possible. To that end, proper maintenance is key, and it all starts with reading the manual. Don’t throw it away with the box! Take the time to read it through and understand the specs and requirements of your model. For example, plenty of people have been burned when they didn’t realize that the gas in their weed eater needed to be ethanol-free.

    Here are some other important elements of weed eater maintenance.

    Before you begin

    Before firing up your weed eater, take a moment to check it over and make sure there are no loose screws or improperly seated parts. The constant vibration of the engine can cause this to occur over time. Also examine the deflector for cracks and make sure that the shaft is clear of debris from the last time it was used.

    With a gas powered weed eater, you also need to take a look at the fuel tank and determine whether it is leaking. If you don’t drain it between uses, make note of the fuel level when you’re done each day. If the level goes down while not in use, it is definitely leaking and can cause a serious hazard, especially if you’re using a metal blade that accidentally strikes a stray stone.

    Keep it clean

    Keep an eye on the air filters and spark arrestor screens in the carburetor of your gas powered weed eater; they will need to be replaced every so often. After checking them and determining that they are in good condition, you can adjust the settings of the carburetor if need be.

    Assess vibration

    Now start up the cutting line and check to see if the vibration is normal. Examine the grips and controls to ensure that all parts are in good working order and that no springs or bushings are broken or missing. Improper vibration can cause numbness in the fingers, hands, and wrists, so it’s important that all safety elements are in good shape.

    Clean the machine

    You’ll probably be ready to relax with a beverage in your beautiful yard after using your weed eater, but take a little bit of time to clean the machine after each use. Wipe down the outside and remove any tangled debris from the cutting line. Make sure as well that the exhaust flow is not blocked in any way – if it is, you may need to replace the muffler screen.

    Routine maintenance

    Just like your car or your lawnmower, a gas powered weed eater has parts that need to be replaced every so often.

    Once a week, check the lubricant level in the gearbox at the base of the cutting head. Simply remove the cap and add more grease if there isn’t enough. Just make sure the box is not filled to the very top, or it will leak when the machine warms up.

    After 100 hours of use, change the spark plug. The correct gap setting is listed in the user manual – another important reason not to throw it away!

    After 150 hours of use, if you have a 2 cycle motor like the ones on our list, decarbonize the engine using a fuel additive. Again, make certain you use one that is noted in the user manual. The additive does the work for you as it is designed to clean the combustion chamber and free the rings. Fill the gas tank completely and use the weed eater until the gas runs out before you fill up again.

    Troubleshooting Your Weed Eater


    It’s totally frustrating when you are nearing the end of your lawn chores – all that’s left is the edging – but the blasted weed eater won’t start. Or worse, it sputters and dies mid-job. Some issues require the help of a good repair person, but there are a few things that you can troubleshoot at home. Here are the most common ones.

    At the beginning of the season

    After a long period of storage, your weed eater may need some maintenance before it is willing to start back up. You should have drained the fuel before storage, but if you didn’t, old fuel could be gunking up the filters. That can cause the tool to stall even if you can get it started.

    If you are having trouble starting it at all, the old fuel is probably not flowing freely through the carburetor to the spark plug. Drain all old fuel and start fresh with a combination of ethanol-free gas and a cleansing additive.

    Also make sure that you maintain a balance of 1 gallon of fuel to 3.2 ounces of oil. This helps keep the motor running smoothly without seizing. Seizing is a common problem when you try to start the engine too many times in succession. For this reason, it’s good to make sure that you have a clear path all around and won’t have to stop your work repeatedly.

    Line Breakage

    The cutting line is what does the work of slicing through weeds, and if it is constantly breaking, you’ll never get the job done. First make sure you aren’t trying to force it to do a job it isn’t meant to do. Branches and thick stalks may need an actual metal blade.

    However, if you’re just working on grass or smaller weeds, the trimmer line may be breaking because it’s old. Line that is 5 years or older becomes brittle and breaks more easily. For that reason, we don’t recommend buying much more than you need at any given time; just get a primary and a spare spool. Replace line at the beginning of the season.

    Proper Storage

    The engine of a gas powered weed eater is prone to flooding if it is stored on its side, so always make sure to prop it up against a wall. This also helps protect the individual parts from damage sustained by contact with dirt and other debris on the ground.

    If the engine has flooded, let the machine rest for 15 minutes or more before trying again.

    So there you have it. Five of the best reviewed gas powered weed eaters and all the basics on maintenance. Yard work is never really fun, but with a powerful tool at your disposal, at least the job will go quickly. We are confident that you can find the best gas weed eater for your needs, no matter the size or slope of your yard. The sense of satisfaction that comes from a beautifully maintained green space is worth all the effort.

    Leave a Comment